Fume Extractor Filters for Soldering Fume Extractor , Air Purifier Filters for Industrial Fume Extractor
Specifications:
|
Name
|
G06-0020
|
|
Pre-Filter
|
for filtering big particles of over 50microns in the fume
|
|
Middle filter
|
For filtering dust particles; for particles above 0.3microns, its filtering efficiency reaches 99.97%.
|
|
Main filter
|
for filtering dust particles; for particles above 0.3microns, it filtering efficiency reaches 99.97%, for filtering hazardous gases, its filtering efficiency reaches above 95%
|
Description:
Mutiple air filters for fume extractor model F6001, F6001D, F6002, F6002D.
Features:
High-efficient Waterun Four-stage absorbing technology
1. First stage: preliminary- effect filtering layer, it can efficiently filter over 80 harmful matters large-size duts, smogs and animal hairs.
2. Second stage: high-efficient filtering layer, it can filter above 0.3micron granules and ducts.
3. Third stage: activated-carbon filtering layer, it can absorb harmful gas like radon gas and toluene.
4. Fourth stage: high-efficient filtering layer. It can prevent the secondary pollution of activated carbon powder.
FQAs:
1. What’s the functions for the filters?
Answers.
1) The Pre-Filter/F8 pre-filter filters large particles of dust, suspended particulates...
2) PP Middle Filter/Fiber glass filter: it filters more than 70 kinds of micro pollutants.
3) Main Filter/Active carbon: it effectively filters the common toxic and hazardous gases.
4) High efficiency filter(combine middle filter and active carbon filter): Double HEPA filtering guarantees the perfect air cleanliness.
2. What’s the life span of our fume extractor?
Answer: Our Brushless Motor can be continuous working 20,000 hours, consider environmental factors. Usually it can use 4-5 years without any problems.
3. The ducts for the fume extractor can be shortened or lengthened?
Answer: Ducts can be bent or lengthened as desired; but we suggest not more than 1.5meter. For multi-station, the total pipe length should not more than 10 meters.
4. What’s the best distance between the nozzle and the smokes?
Answer: The distance to be 5-15cm is the best.
5. What’s the life span for the pre-filter, middle filter and the main filter?
Answer: Normally, we suggest the replacement periods for pre-filter is 1month, middle filter 3 months, and the main filter 6 months. However, it depends on the different environment.
6. Bent pipe will affect smoke purify?
Answer: Yes, it affect the suction power, it is better to reduce the bent rate.
7. Can our fume extractor completely filtered poison gas?
Answer: No, there still no any kind of filter can filter out 100% of hazardous gases, but you can make a different filter net rate upon request.
8. Does your fume extractor can purify the particles for clean room?
- Sure, the efficiency is very obviously.
9. Can we use the fume extractor on high temperature environment?
- Better no more than 60 degrees. It is to avoid the risk of fire.
Product Tags:
|
|
White / Black Portable Air Filt For Soldering Fume Extractor / Industrial Fume Extractor Images
|
